Owner`s manual

Removing Key Fob From Ignition

Place the shift lever in PARK or place the manual

transmission in REVERSE and apply the parking brake.

Turn the Key Fob to the OFF position and then remove

the Key Fob.

With the Keyless Enter-N-Go™ system, the EVIC will

display the ignition switch position “OFF/ACC/RUN”.

Refer to “Electronic Vehicle Information Center (EVIC) —

If Equipped” in “Understanding Your Instrument Panel”

for further information.

NOTE: The power window switches, radio, power sun-

roof — if equipped, and ignition-powered power outlets

will remain active for up to 60 minutes after the ignition

switch is turned to the LOCK position. Opening either

door will cancel this feature. The time for this feature is

programmable. Refer to “Electronic Vehicle Information

Center (EVIC)/Personal Settings (Customer-

Programmable Features)” in “Understanding Your In-

strument Panel” for further information.

CAUTION!

• If your vehicle battery becomes low or dead, your

Key Fob will become locked in the ignition.

• Do not attempt to remove the Key Fob while in this

condition, damage could occur to the Key Fob or

ignition module. Only remove the emergency key

for locking and unlocking the doors.

(Continued)

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15