Operating instructions

8 DR
®
FIELD and BRUSH MOWER
Specifications
Premier Pro Pro-XL
Engine
See Engine Owners
Manual for details
See Engine Owners
Manual for details
See Engine Owners
Manual for details
Fuel Capacity
2-1/2 Gal. (9.5 L) 2-1/2 Gal. (9.5 L) 2-1/2 Gal. (9.5 L)
Cutting Capacity
4' –High Grass &
Weeds; 2"-Thick
Sa
p
lin
g
s
6' –High Grass &
Weeds; 2-1/2"-Thick
Sa
p
lin
g
s
6' –High Grass &
Weeds; 3"-Thick
Sa
p
lin
g
s
Cutting Width
26" 26" 30"
Cutting Height
4" 4" 4"
speeds
4 Forward; 1 Rev. 4 Forward; 1 Rev. 4 Forward; 1 Rev.
Tires
18" x 6-1/2" Lugged 18" x 6-1/2" Lugged 18" x 6-1/2" Lugged
Machine Dimensions
78"L x 33"W x 41"H 78"L x 33"W x 41"H 78"L x 38"W x 41"H
Machine Weight
334 lbs. 352 lbs. 368 lbs.
Shipping Dimensions
55"L x 46"W x 46"H 55"L x 46"W x 46"H 55"L x 46"W x 46"H
Shipping Weight
459 488 494
Unpacking the Mower
NOTE: Unpacking the DR FIELD and BRUSH MOWER is a two-person job. We recommend you have an extra set of hands available
before you begin.
Tools & Supplies Needed:
• Screwdriver
• Hammer
• Knife
• Gloves
1. Stand to one side and cut the banding.
2. Remove the top of the carton. Cut the cardboard top to bottom on one of the narrow sides of the box and peel it off the pallet.
Be careful of the staples.
3. Pry off the fasteners and cut any ties holding the machine to the pallet.
4. Remove the Brush Deck by lifting it up and over the supporting lumber, and then remove the lumber. You may need to
remove one of the cross slats. At this point, the Lawn Deck (if ordered) is free standing and you can lift it off the pallet.
5. Roll the Power Unit off the pallet. Do not discard the cardboard and pallet until you are fully satisfied with your new DR FIELD
and BRUSH MOWER.
Wear gloves and be very careful when handling the deck(s). The blades are very sharp, and may spin as you maneuver the deck(s).
The bandin
g
is under tension and ma
y
sna
p
and cut
y
ou. Alwa
y
s stand to one side when cuttin
g
the band.