Service manual

16-62 ELECTRICAL SYSTEM
Meter
Check 5: Trip Meter A/B Check
•
Connect the wires in the same manner as Check 3.
•
PushingtheMODEbutton[A],cyclesthetripmeterAor
B[B].
•
Raise the input frequency of the oscillator to see the result
of this inspection.
If the value indicated by the trip meter A or B does not
increase, replace the meter unit.
Check 6: Fuel Meter Check
•
Connect the wires in the same manner as Check 1.
○
The first segment (LCD) [A] should flash.
It the segment (LCD) does not flash, replace the meter
unit.
•
Connect terminal [5] to the battery (–) terminal.
○
When terminal [5] is connected, one segment in the fuel
gauge should appear every 15 seconds.
CAUTION
When all segments appeared, disconnect the termi-
nal [5].
If this display function does not work, replace the meter
unit.
Check 7: 2WD/4WD Indicator Lights Check
•
Connect the wires in the same manner as Check 1.
○
The 2WD indicator light (LCD) [A] should appear.
•
Connect terminal [4] to the battery (–) terminal.