Service manual

15-18 FRAME
Guards
Front Guard Removal
•
Remove:
Front Bottom G uard (see Front Bottom Guard Removal)
Bolts [A] and Collars
Front Guard C over [B]
•
Remove:
Front Carrier Bracket Bolts [A]
Radiator Cover Screws [B] and C ollars (both sides)
Front Guard Bolts [C] (both sides)
•
Remove the front guard [D] from the radiator bottom stop-
pers [E].
Front Guard Installation
•
Insert the radiator bottom stoppers in the grommet in the
front guard.
•
Install:
Front Guard [A]
Front Guard Bolts [B]
•
Apply a non-parmanent locking agent to the front carrier
bracket bolts.
•
Tighten:
Torque - Front Guard Bolts: 46 N·m (4.7 k gf·m, 34 ft·lb)
Front Carrier Bracket Bolts: 32 N·m (3.3 kgf·m, 24
ft·lb)
•
Install:
Radiator Cover Screws
Front Guard C over [A]
Bolts [B] and Collars [C]
Bolts [D] and Collars [E]