Service manual

FRAME 15-9
Carriers
Front Carrier Removal
•
Remove:
Front Carrier Bolts [A]
Collars
Front Carrier [B]
Front Carrier Installation
•
Install:
Long Collars, L = 44.6 mm (1.8 in.) [A]
Short Collars, L = 21.6 mm (0.9 in.) [B]
Front Carrier [C]
•
Apply a non-parmanent locking agent to the front carrier
bolts.
•
Tighten:
Torque - Front Carrier Bolts [D], L = 70 mm (2.8 in.): 32 N·m
(3.3 kgf·m, 24 ft·lb)
Front Carrier Bolts [E], L = 50 mm (2.0 in.): 32 N·m
(3.3 kgf·m, 24 ft·lb)
Front Carrier Bracket Installation
•
Install:
Front Carrier Bracket [A]
•
Apply a non-permanent locking agent on the thread of the
front carrier bracket bolts and tighten them with a speci-
fied torque.
Torque - Front Carrier Bracket Bolts [B]: 32 N·m (3.3 kgf·m,
24 ft·lb)
Rear Carrier Removal
•
Remove:
Rear Carrier Bolts [A]
Collars
Rear Carrier [B]