Service manual

PERIODIC MAINTENANCE 2-19
Periodic Maintenance Procedures
•
Remove:
Front Guard Cover (see Front Guard Removal in the
Frame chapter)
Front Fender (see Front Fender Removal in the Frame
chapter)
Headlight Cover (see Headlight Cover Removal in the
Frame chapter)
Radiator Screen Mounting Screws [A]
Radiator Screen [B]
•
Clean the radiator screen in a bath of tap water, and then
dry it with compressed air or by shaking it.
•
Clean the radiator.
CAUTION
When cleaning the radiator with steam cleaner, be
careful of the following to prevent radiator damage.
Keep the steam gun [A] away more than 0.5 m (20
in.) [B] from the radiator core.
Hold the steam gun perpendicular [C] (not oblique
[D]) to the core surface.
Run the steam gun following the core fin direction.
Water Hoses and Connections Inspection
○
The high pressure inside the water hose can cause
coolant to leak [A] or the hose to burst if the line is not
properly maintained. Visually inspect the hoses for signs
of deterioration. Squeeze the hoses. A hose should not
be hard and brittle, nor should it be soft or swollen.
Replace the hose if any fraying, cracks [B] or bulges [C]
are noticed.
•
Check that the hoses are securely connected and clamps
are tightened correctly.
Coolant Change
WARNING
To avoid burns, do not remove the radiator cap or
try to change the coolant when the engine is still
hot. Wait until it cools down.
Coolant on tires will make them slippery and can
cause an accident and injury. Immediately wash
away any coolant that spills on the frame, engine,
or wheels.
Since coolant is harmful to the human body, do not
use for drinking.
•
Remove:
Radiator Cover ( see Radiator Cover Removal in the
Frame chapter)