Service manual

FINAL DRIVE 11-57
Rear Axle
•
Be sure outside diameter of the band [A] is less than the
maximum diameter.
Maximu m O u tside Diameter of Ban d : 82.9 m m (3.26 in.)
Inboard Joint Boot Removal
•
Remove:
Rear Axle (see Rear Axle Removal)
•
Tap the joint portion of the bands [A] with a suitable tool.
•
Scrap the removed boot bands.
•
Slide the joint boot [B] toward the outboard joint.
•
Remove the retaining ring [A].
•
Separate the bearing cup from the axle s haft.
•
Remove the steel balls [A].
•
Slide the cage [B] toward the outboard joint.
•
Remove:
Circlip [A]
Special Tool - Outside Circlip Pliers [B]: 57001-144