Service manual

FINAL DRIVE 11-29
Front Axle
Left Front Axle: 108.7 mm (4.28 in.) [A]
•
Open the edge [A] of the boot in order to equalize the air
pressures.
•
Tighten the large band [A] and bend the tangs securely to
hold down the end of the band.
Maximum Outside Diameter of Band: 80 mm (3.15 in.)
(After tightening the outside diam eter)
Inboard Joint Boot Removal
•
Remove:
Front Axle (see Front Axle Removal)
Boot Bands [A]
•
Scrap the removed boot bands.
•
Slide the joint boot toward the outboard joint [B].
•
Remove the retaining ring [A].
•
Separate to the axle shaft.