Service manual

WHEELS/TIRES 10-9
Wheels (Rims)
Wheel Removal
•
Squeeze the brake lever slowly and hold it with a band
[A].
•
Loosen the wheel nuts [A].
•
Support the vehicle on a s tand or a jack s o that the wheels
are off the ground.
Special Tool - Jack: 57001-1238
•
Remove:
Wheel Nuts
Washers (Front Wheel)
Plate [B] (Rear Wheel)
Wheel
Wheel Installation
•
Check the tire rotation mark [A] on the tire, and install the
wheel accordingly.
NOTE
○
The direction of the tire rotation [B] is shown by an arrow
on the tire sidewall.
•
Position the wheel so that the air valve [A] is toward the
outside of the vehicle.
•
Wipe dry the surface of the rim.
•
Wipe dry the nuts, washers (Front Wheel) and plate (Rear
Wheel).
•
First tighten the wheel nuts in a criss-cross pattern.
First Torque - Wheel Nuts: 15 N·m (1.5 kgf·m, 11 ft·lb)
•
Finally tighten the wheel nuts in a criss-cross pattern.
Final Torque - Wheel Nuts: 76 N·m (7.7 kgf·m, 56 ft·lb)