Service manual

7-12 ENGINE LUBRICATION SYSTEM
Oil Pump
•
Install the oil pump drive chain [A] with the oil pump as-
sembly [B].
•
Tighten:
Torque - Oil Pump Cover Bolts [C]: 8.8 N·m (0.90 kgf·m, 78
in·lb)
•
Install:
Chain Guide [A] and Collar [B]
•
Tighten:
Torque - Oil Pump Drive Chain Guide Bolt [C]: 8.8 N·m (0.90
kgf·m, 78 in·lb)
•
Apply grease to the O-ring [A].
•
Install:
Pin [B]
Spring [C]
O-ring
Oil Pump Drive Chain Tensioner Bolt [D]
•
Tighten:
Torque - Oil Pump Drive Chain Tensioner Bolt: 25 N·m (2.5
kgf·m, 18 ft·lb)