Service manual

3-96 FUEL SYSTEM (DFI)
Fuel Tank
•
Remove the quick rivets [A] to speparate the fuel tank [B]
and tank case [C].
Fuel Tank Installation
•
Note the above WARNING (see Fuel Tank Removal)
•
Check the insulators [A] on the tank case.
If the insulators are damaged or deteriorated, replace
them.
•
Check the rubber dampers [A] on the frame as shown.
If the d ampers are damaged or deteriorated, replace
them.
•
Install the fuel tank with case, and tighten the bolts.
•
Check the damper [A] on the damper bracket [B].
If the damper is damaged or deteriorated, replace i t.
•
Tighten the damper bracket bolt.
•
Install the check valve so that the arrow [A] faces fuel tank.
[B] Black Color
[C] Blue Color