Operating instructions

6 DR

ALL-TERRAIN

™

MOWER Assembly, Installation & Maintenance Instructions for the 42" Lawn Mower Deck

Install the Discharge Chute

1. If your lawn mower deck shipped separately from

your DR

ALL-TERRAIN™ MOWER, you'll also

need to install the discharge chute. From below,

insert the bolts up through the holes in the deck.

2. Set the discharge chute in place, fit the bracket over

the bolts and tighten with the nuts (Figure 4).

To Remove the Brush Deck

1. Remove the black belt guard by unscrewing the

black knob, lifting the cover and pulling up and

back to remove it.

2. Release the belt tension lever (Figure 5).

3. Remove the belt from the pulley (Figure 6).

4. Remove the pin and collar (Figure 7), then pull the

power unit away from the deck.

Figure 4

Figure 5

Figure 7

Figure

WARNING! Always disconnect the spar

plug wire before servicing your machine.

Caution: Do not pull the deck away from the

ower unit unless you have someone holding the

handlebars to prevent it from falling backward.

Belt Removed

Belt Tension Lever

Remove Pin & Collar