Operating instructions

10 DR

ALL-TERRAIN

™

MOWER Assembly, Installation & Maintenance Instructions for the 42" Lawn Mower Deck

• Measure the distance from the ground to the deck

at the front and back of the deck (Figure 13).

• Adjust the deck from front to back as needed by

moving to a different hole in the rear adjustment

bracket (Figure 14). Each hole in the top of the

bracket will adjust the deck height by 1/16".

• Fine adjustment of the front to rear deck tilt (less

than 1/4" change) is accomplished by moving both

front bracket-mounting bolts to different holes in

the adjustment brackets (Figure 15). Each hole

change in the front brackets will adjust the rear

deck height by 1/16".

• Each hole in the bottom of the rear brackets

will raise or lower the rear of the deck by 1/2".

The rear of the deck can be lowered an

additional 1/2" by using the outside hole in the

top of the rear bracket.

• Coarse adjustment of the front to rear deck tilt

(greater than 1/4" change) is accomplished by

moving the bolts in the bottom holes of the rear

brackets to raise or lower the rear of the deck by

1/2". The rear of the deck can be lowered an

additional 1/2" by moving the bolts in the top

holes of the rear bracket to the outside holes.

5. Level the deck from side to side:

• Measure the distance from the ground to the

deck on the left and right sides of the deck

(Figure 13).

• Adjust the deck as needed by moving to a

different hole in the bracket (Figure 15). Each

hole in the bracket will change the deck height

on that side by 1/4".

ure 14

Figure 13

Figure 15