Operating instructions

DR
®
ALL-TERRAIN
™
FIELD and BRUSH MOWER Safety & Operating Instructions 15
To Remove the Wheels
Tools Needed:
· 3/4" socket with extension
!
WARNING: Always disconnect the
spark plug wire before servicing your
machine.
1. Block the machine so the wheel to be
removed is off the ground.
2. Remove the three nuts and slide the wheel
off.
To Adjust the Parking Brake
Tool Needed:
· 1/2" open end wrench
!
WARNING: Always disconnect the
spark plug wire before servicing your
machine.
To adjust the parking brake, tighten or loosen
the nut shown in Figure 21. This will
increase or decrease pressure on the brake
pad.
Transmission
The transmission is maintenance-free and does not need additional lubrication.
Figure 20
Figure 21