User Manual

HXR-P060 Eye Massager
Instructional Manual
Product Name
Product size
Battery capacity
Product Weight
Main Device*1
Type-C Charging Cable*1
Instructions*1 Pouch*1
Product Parameters
Function and name of each part
Warm Eye Massager
190mm*72mm*71mm
3.7V 1200mAh
210g
Product Model
Rated Power
Charging Voltage
Charging Port
HXR-P060
6 W
5 V 2A
USB Type-C
Product List
Clairvoyant
Silicone massage head (16 in total)
Charging socket
POWER Indicator
Heating mode Indicator
Bluetooth Indicator
Bluetooth Key
Heating Key
Switch key
Press and hold the key to start the device, and the indicator above the key is always on after starting the
device.
Short press the key the massage mode, the default relaxation mode is on, and the eye hot therapy function
is on.
There are five massage modes in the eye massager, named as: Relaxation mode, Eye beauty mode, Sleep mode,
Comprehensive mode and the Heating mode.
Mode 1: Relaxation mode, with vibration, music and eye hot therapy function, voice prompt for different mode:
Relaxation mode.
Mode 2: eye beauty mode, with vibration, music and eye hot therapy function, voice prompt for different mode:
eye beauty mode.
Mode 3: sleep mode, with vibration, music and eye hot therapy function, voice prompt for different mode: sleep
mode.
Mode 4: comprehensive mode, with vibration, music and eye hot therapy function, voice prompt for different
mode: comprehensive mode.
Mode 5: heating mode, no vibration and music, separate hot therapy function, voice prompt for different mode:
heating mode.
Short press the key can turn music on/off.
Short press the key can turn on/off the heating function. (Note: the key cannot be used in heating mode)
Long press the key to enable the Bluetooth function. The Bluetooth name of the phone is 3D EYE MAGIC
TAPPING. After enabling Bluetooth, you can check it on the mobile phone.
After successful connection to this device, there will be a voice prompt of "successful Bluetooth connection".
You can play the audio files in your phone through this device. Whenever next time you turn on the device, the
last used device will be automatically connected.
*Note: The default working time of power on is 15 minutes.
If you need to extend the service time, you need to turn on the host again.
US B c a b le ( Ty p e -C)
Product Operating Instructions
Wearing method
Before wearing, please align the massage head with your eyes and adjust the elastic belt to the most comfortable
position before starting the machine.
The elastic belt adjustment mode is shown in the figure below
Product charging
If it is used for the first time or has not been used for a long time, please charge it as follows:
1. The USB cable in the accessory should be plugged into the charging socket on the bottom left side of the
product
2. Insert the USB cable into the power adapter and connect the power
3. After charging starts, the red indicator light above the switch key of the product flashes.
4. After the device is fully charged, the charging indicator turns to a steady blue light, and the indicator turns off
after continuing to charge for 3 minutes. Please unplug the power supply in time after the product is fully charged.
*Note: Do not use this product during charging.
The blue indicator will flash when the power of the product is low. Please charge the battery in time after the
indicator is on.



