User Manual

www.DrRobot.com

- 10 -

Robot Operations

Step 1: If you have not installed the demo and support programs, insert the installation

CD to CDROM and run the “Setup.exe” program that is under “X80Pro Control

Installation” folder.

Step 2: Connect the PC to the wireless router (one of the LAN ports) (the router has IP

192.168.0.200) included in the package.

Step 3: Push red power switch on the front to turn on the robot.

Step 4: Run the “WiRobotGatewayforWiFi.exe” from Start -> All Programs -> Dr Robot

Inc -> WiRobotGateway.exe, Use “drrobot1” as robot ID, enter your robot IP address to

“IP” textbox, “10001”as “Port”, and then click “Connect”.

Step 5: Run the “X80Pro.exe” from Start -> All Programs -> Dr Robot Inc -> X80Pro Control. Once the GUI

popup, enter the camera login information, and then click “Connect”.