User Manual

Copyright © 2001-2009 Dr Robot Inc. All Rights Reserved. www.DrRobot.com
- 14 -
Network Connection and Login Information
Network Settings
The included pre-configured wireless 802.11 b/g router has the following pre-set settings:
SSID dri Router LAN 192.168.0.200
WEP 128bits Login ID admin
KEY 112233445566778899AABBCCDD Password drrobot
Key Type Open Key
WiFi module connects to two serial devices through channel I and II (TCP/IP port 10001 and 10002
respectively). They are pre-configured as below:
Name Robot WiFi Module IP
192.168.0.207
Channel-I
(10001)
115200, 8,N,1, flow control, UDP, Datagram
01, remote IP:0.0.0.0
Channel-II
(10002)
115200, 8,N,1, flow control, UDP, Datagram
01, remote IP:0.0.0.0
Advanced Network Settings
It’s possible to use different network settings (e.g. IP) for the server PC, but the “Virtual Server” settings on the
router must also be changed accordingly in order for the Internet remote monitoring feature to work properly.
You could also change the router settings such as IP and SSID etc. If you need to do so, you are required to
change the network settings on the WiFi modules on the robot by following the guidelines as illustrated on the
WiFi Module manual.
Support Team Contact Information:
Email: [e-mail]
Phone: [phone]