User Manual

www.DrRobot.com

- 10 -

Robot Operations

Step 1: If you have not installed the demo and support programs, insert the

installation CD to CDROM and run the “Setup.exe” program that is under “X80H

Control Installation” folder.

Step 2: Connect the PC to the wireless router (one of the LAN ports) (the router

has IP 192.168.0.200) included in the package.

Step 3: Push red power switch on the front to turn on the robot.

Step 4: Run the “WiRobotGatewayforWiFi.exe” from Start -> All Programs -> Dr

Robot Inc -> WiRobotGateway.exe, Use “drrobot1” as robot ID, enter your robot IP

address to “IP” textbox, “10001”as “Port”, and then click “Connect”.

Step 5: Run the “X80H.exe” from Start -> All Programs -> Dr Robot Inc -> X80H Control. Once the GUI popup,

enter the camera login information, and then click “Connect”.