Quick User Guide

www.DrRobot.com

- 11 -

Robot Operations

Step 1: If you have not installed the programs, insert the installation CD to CDROM and

run the “Setup.exe” program which under “Sputnik Control Installation” folder to a PC

(called server PC); set your PC IP to 192.168.0.104, Gateway: 192.168.0.200 and

Subnet Mask 255.255.255.0.

Step 2: Connect the server PC to the wireless router (one of the LAN ports) (the

router has IP 192.168.0.200) included in the package.

Step 3: Turn on the robot main power switch on the back. NOTE: Always keep a safe

distance from the robot.

Step 4: Run the “DrRobotSputnikControl.exe” from Start -> All Programs -> Dr Robot

Inc -> Sputnik Control -> Dr Robot Sputnik Control. The “DrRobotSputnikControl.exe”

connects to robot via the DrRobotMotion gateway & DrRobotMultimedia1 gateway programs. It requires robot

information which can be found in “Networking Connection and Login Information” section. After entering or

confirming the information, then click “Connect Robot”.

Robot ID

IP of the Robot WiFi module 1

IP of the Robot WiFi module 2

Robot ID

IP of the Robot WiFi module 1

* O

tion