User Manual

www.seagullmodels.com
7
Vent tube.
Fuel fill tube.
Fuel pick up
tube.
 2) Follow diagram below for wheel pant
installation:
Wheel Collar.
Axle.
Wheel.
Nut.
Wheel Pant.
Landing Gear.
Nut.
Plywood Washer.
 1) Assembling and mounting the wheel
pants as shown below pictures.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flow
through easily.
WHEEL AND WHEEL PANTS.
Plywood Washer.
Caution when cutting the axles and wear
protective goggles.
 3) You have to trim each axles and using a
tool cutting and cut-off wheel.
57mm.
14mm.
7mm.
Plywood washer.
Thread locker.