User Manual

www.seagullmodels.com
17
 1) Plug the servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
 2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
INSTALLING THE BATTERY-RECEIVER.
 3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape. See pic-
ture below.
Tie wrap.
Receiver.
Battery.
Insert two wing panels as pictures below:
ATTACHMENT WING-FUSELAGE.
Attach the aluminium tube into fuselage.
THROTTLE SERVO ARM
INSTALLATION.
 1) Install adjustable servo connector in
the servo arm.
Throttle.
Antenna wire.
Adjustable Servo
connector.
Servo arm.
Antenna.
 2) Install the pushrod throttle.