Manualshelf

User Manual

ManualsBrandsDr Mad Thrust ManualsHobbyDr. Mad Thrust series 5A HV BEC with Inbuilt Aux Controlled On/Off Switch for Accs
11121314151617181920
www.seagullmodels.com
11
3x10mm(6pcs).
INSTALLING THE SWITCH.
Install the switch into the precut hole in the
side of the fuselage.
1) Install the spinner backplate, propeller
and spinner cone. (spinner is not included).
INSTALLING THE SPINNER.
Switch.
The propeller should not touch any part
of the spinner cone. If it does, use a sharp
modeling knife and carefully trim away the
spinner cone where the propeller comes in
contact with it.
Remove covering.