Operation Manual

51
Functional description
see 1/6 The air nozzles for the head and body area
can be moved in 2 axes in order to adjust the
air stream individually.
see 2 The integrated loud speaker is connected to
an external audio system in the studio; pro-
gram choice and audio volume take place.
see 3/4 With the rocker switch the ventilator for the head
and body area can be switched on or off
independent of each other.
see 5 The display is activated with the start of the
equipment and shows the tanning time in
minutes and seconds.
see 5a A connected coin timer or external time control
can be released by way of a start / stop key.
This "remote control" affects the immediate
start of the tanning process for coin operation.
When the external time control is off the lamps
can be switched on and off with the start/stop
key.
Ventilation control
head area
Ventilation control
body area
Start/Stop-key
4-digit display
Replacement of UV-lamps and starters
The UV-lamps of your tanning equipment (120 W/180
W) have to be replaced in certain time intervals
depending on total operating hours.
The service life of the UV-low pressure lamps as well
as the metal halogen lamps for the intensive face
tanners is to approximately 500 - 800 hours.
Please note:
When replacing the UV-low pressure lamps and metal
halogen lamps use only the original spare bulbs for
this type of equipment.
You can order these by specifying equipment article
number (see identification shield) at your customer
service department or at your dealer.
Maintenance
Fig. 65
english