Operation Manual

Before you assemble the upper connection plate to the

ceiling of the changing booth, screw in the enclosed

holding profile on the firmly fixed tanning segments

(fig. 48).

Now place the connection plate on the holding profile

and fasten with the M6 screws (fig. 49).

Now the ceiling plate is placed on the side walls. The

connection to the side walls takes place with connectors

(fig. 46).

After this the ceiling plate is connected to the column

elements (fig. 47).

Fig. 46

Fig. 47

Fig. 48

Fig. 49

Holding profile

Now assemble the door limit stop profile right and left

to the posts on the booth inside (fig. 50).

Fig. 50

english