Operation Manual

39
Connect the cable plug with the bushing parts in the
upper area of the center column from the inside
according to the wiring diagram (Fig. 29).
Fig. 29
The connection of the exhaust air unit to the control
takes place in the same way.
Here also lead the connection line from above into the
center column and plug into the upper bushing parts
(Fig. 30).
Fig. 30
Now put the main connection cable (H05W - 5 FG 2.5
2
from below into the center column.
Lead the cable through the strain release to the main
connection terminal and plan the electric connection
Fig. 31).
Please note that the electrical connection of the
equipment may only be handled by an approved
specialist or a licensed electrician under
consideration of the regulations of VDE and the
local EVU.
Main connection
cable (5 x 2,5 m
2
)
Fig. 31
Connection to a coin box (optional)
Fig. 32
Connect the coin box to the marked clamp at the bottom
of the center column (indicated in fig. 32).
The wiring scheme in Fig. 32 shows how the cables
must be connected.
english