Operation Manual

Now open the lamp frame to the open position and

disconnect the electric connection by pulling out the

plug on the inside (fig. 7).

Now the complete lamp frame can be lifted out towards

the front.

The door unit is supported on the hinge side above and

below and is locked on the opposite side (bolt lock).

Disassembly of the filter disk frames with

the HD-elements

Please note here that this frame has to be

removed as already described.

Remove the bolt from the bearing (fig. 8).

Fig. 7

Fig. 8

Fig. 9

bearing

bolt

Unscrew the locking screw for the lamp frame (fig. 6).

Fig. 6

english