Operation Manual

33
Start-up and operation
The tanning unit doesnt run without an external
time control. The coin box or an external timer
has to be connected to the unit according to the
wiring diagram (fig. 18 a).
As soon as the electric supply has been provided for
the unit is ready to be used.
The unit is controlled with the help of the operator's
panel. It comprises the following elements (fig. 41):
À On/off switch
Á Time display
 rocker switch for air nozzles head area
à rocker switch for air nozzles body area
À
Â
Ã
Á
fig. 41
fig. 42
english
Abb. 42
air nozzles head area
handle loops
operator's panel
loudspeaker
air nozzles body area
Functional description
The air nozzles for the head and body area can be
moved in 2 axes in order to adjust the air stream
individually.
The integrated loud speaker is connected to an
external audio system in the studio; program choice
and audio volume take place.
With the rocker switch the ventilators for the head and
body area can be switched on or off independent of
each other.
The display is activated with the start of the equipment
and shows the tanning time in minutes and seconds.
A connected coin timer or external time control can be
released by way of a start / stop key. This "remote
control" affects the immediate start of the tanning
process for coin operation.
When the external time control is off, the lamps can
be switched on and off with the start/stop key.
Kindly notice:
The handle loops have a maximum breaking-point
and are not provided for carrying the whole body-
weight. They only serve as a relief of the arms during
the tanning of the inside arms.