Operation Manual

14
Maintenance and servicing
Separate the equipment before
all work on the equipment from
the net.
The burners of the tanning system have
a high service life. The intensity of the
burners should to leave have you to be
replaced.
To the burner or filter disks changes must
first the disk framework
with the acryl disk be away-folded.
Loosen for this the safety screw of the
disk frame.
safety screw
Retaining
magnet
Retaining
magnet
Through pull releases themselves the disk
frame from the magnet fixtures and can
downwards be swung.
Solve through unscrew the two fixing
bolts the respective filter cartridge.
Make sure with these work
that the filter disks are not
scratched or damaged. The
equipment may be never operated
with scratched or damaged filter
disks.
The burner can be pulled now from the
version and replaced with a new.
Filter disk change
A possibly defective filter disk can be
taken from the dismantled
filter cartridge and replaced by a new.
Pay attention with the reassembly of the
equipment which functions the
break sensor duly.
break sensor
english