Operation Manual

13
Store the appointed time
l Tune the favoured tanning time at the
timer.
Now the sunbed is working as long as
the appointed time is expired.
In between it is not possible to shift the
time, the bottons are blocked. But the
sunbed can be switched off an on.
By switching on again the balance time
elapses. After run of time the sunbed cuts
off and a new time can be set.
The tanning system is released at the
digital timer by the code switch Ä and
switched on by operation of the on/off
keyÀ.
With the keys  and à you can select
your tanning time.
à = up, Â=down
After loose of time the digital timer of the
tanning unit switches off automatically.
After tanning session the unit is switching
over to after cooling mode for 3 minutes.
Start-up
Timer adjustment
jumper 2
jumper 1
Jumper 1 (time period):
opened = maximum period 30 min
closed = maximum period 60 min
Jumper 2 (fan delay)
opened = without fan delay
closed = wizh fan delay
l Push the button Á and " upward" Ã
at the same time
english
À
Á
ÃÂ Ä