Operation Manual

Swing the canopy in the rear pivot point (1) out of the

front lock pin (2) upward and out.

Finally, the canopy is removed at a slant to the front side

and placed on a prepared cushioned surface on the

floor.

28 english

Disassembly of the bench

For ease of transport of the bench, it is necessary to

disassemble the foot-end body cooling fan first.

The body cooler is fastened to the housing plate at the

foot end with 2 threaded fasteners M8 (DIN 912), shims

and nuts M8.

First pull the plug for the electrical connection on the

underside of the bench.

Finally remove the threaded fasteners (M8) and remove

the body cooler, by which the electrical supply cable is

pulled through the opening in the side housing.

hex socket screw

body cooling

fan