Operation Manual
15
For the conclusion of the bench assembly you install
now still the two foot side screens. These parts are in
the packing of the upper section into the upper packing
padding.
Fasten these screens as in Fig. 5, in each case shown
at the left and right exterior of the feet. Use for this eight
pieces of tapping screws 4.2 x 9.5 from the accessory
bag.
After the assembly of the condition feet and the
screens you place the bench in operation position
against the place planned for it.
Into the upper packing padding of the upper section you
find still another strake (plate) and the front base
screen (plastic part). You place the strake as in Fig. 6
shown, under and between the condition feet and
screws them with 2 pieces of screws 4.2 x 9.5 onto the
feet.
FIG 1
FIG. 2
©
FIG. 3
FIG. 4
right leg
(when in user position)
Mounting screw
rear of unit
in this position is
the equipment
power supply plug,
this side is the
bench backside
ABB. 5
FIG. 5
4 x bolt
Mounting
screw
front of unit
right leg left leg
(when in user position)
Strake
FIG. 6
ASSEMBLY "PERFEKT E"
Open the carton with the base where it says "Hier
oben". Take the two legs (1 x left, 1 x right), the two
gas struts, the head cushion and the bag with the
assembly kit out of the top packaging cushions.
After you have taken these parts and the top
packaging cushions, with 2 persons lift the base out
of the carton and place it as with the lamps pointed
down toward the floor.
Four the mounting of the legs it is advisable to rest
the base on top of the carton, see fig. 2.
Four prongs stick out of the bottom of the base, onto
which the legs have to be mounted. The screws for
the legs are already screwed into the prongs, which
means you first have to take out these screws and
stick the legs, as shown in fig. 3, onto the prongs
and then put the screws you had taken out before
back in. Thoroughly tighten these screws (you find
the tools for this in the assembly kit).
Please note that you will mount one left and one right
leg. The allocation left and right can be explained better
in a picture than in words, therefore look at the following
illustration with the explaining text.
english