User Manual

Features

A. “Cool-Touch” cabinet E. MODE button

B. LED temperature display F. POWER button

C. Visual alarm LED G.

Encoder knob

D. Power LED

Special Features

LED Display – When the unit is plugged in, the LED display will show the

room temperature. At Auto mode, it will display the set value 2 minutes

after the desired temperature is set.

Overheat Shut-Off Protection System –This heater includes a protection

system that shuts off the unit if it overheats for any reason.

Inlet Air Overheat Protection System – This heater will automatically shut

off if the inlet air duct becomes obstructed and causes the unit to overheat.

Safety Tip-Over Switch – The Dr. Infrared Heater is designed to shut off

automatically when tipped in any direction. The alarm will beep and the

LED display will flash. Place the heater on a flat, smooth, stable surface to

prevent the heater from tipping over again. When returned to a normal

upright position, the heater is ready for use again. This is a safety feature

to avoid the possibility of fire should the unit be tipped accidentally.