User Manual

1. Carry handle
2. Housing
3. Safety grille
4. Heating element
5. Thermostat control
6. Plug (NEMA #6-30P)
IMPORTANT!!
THIS HEATER IS FOR USE ON THE FLOOR
Prior to operating the heater, ensure the electrical receptacle is of the configuration and capacity appropriate
for the heater. See receptacle configuration in OPERATING INSTRUCTIONS. This heater is for use on
240 volts. The cord has a plug as show
none should be used. The type of receptacle is a 240
installed, it provides a ground connection through the cord to the heater to
shock.
Receptacle: NEMA #6-
30R 250V 30 Amps
GROUNDING AND
THIS HEATER IS FOR USE ON THE FLOOR
ONLY.
Prior to operating the heater, ensure the electrical receptacle is of the configuration and capacity appropriate
for the heater. See receptacle configuration in OPERATING INSTRUCTIONS. This heater is for use on
240 volts. The cord has a plug as show
n in #6 above. No adapter is available for this blade configuration, and
none should be used. The type of receptacle is a 240
-
volt grounding receptacle (NEMA 6
installed, it provides a ground connection through the cord to the heater to
protect the operator from electric
30R 250V 30 Amps
Plug: NEMA #6
-
PARTS OF THE HEATER
GROUNDING AND
OPERATING INSTRUCTIONS
5
Prior to operating the heater, ensure the electrical receptacle is of the configuration and capacity appropriate
for the heater. See receptacle configuration in OPERATING INSTRUCTIONS. This heater is for use on
n in #6 above. No adapter is available for this blade configuration, and
volt grounding receptacle (NEMA 6
-30R). When properly
protect the operator from electric
-
30P 250V 30 Amps