User Manual

Advanced Dual Heating System (ADHS) - Dr. Heater is the first to feature a

dual heating system for maximum heat transfer rate. It combines the energy

efficiency of infrared heat with the comfort of convection heat to heat your room

fast and comfortably—without hot spots and cold spots.

Features

A. “Cool-Touch” cabinet E. MODE button

B. POWER button F. LED temperature display

C. Decrease temperature button G. Standby ON/OFF button

D. Increase temperature button H. Power LED

Operating Instructions

1. Plug the power supply cord into a grounded wall outlet. (120VAC,

60Hz)

Important: This heater comes with a

grounded (three-prong) plug. The

grounded plug must be used with a

grounded outlet. Do not use an

adapter in a two-slot wall outlet unless

the ground plug of the adapter

properly connects to a building

ground. Using the heater without a

properly grounded outlet or adapter

could result in an electric shock

hazard. The cord has a plug as shown

at A in the following figure. An adapter,

as shown at C, is available for

connecting three-blade grounding

type plugs to two-slot receptacles.

The green grounding lug extending

from the adapter must be connected

to a permanent ground such as a

properly grounded outlet box. The

adapter should not be used if a three-

slot grounded receptacle is available.