Full Product Manual

Features

A. “Cool-Touch” cabinet E. MODE button

B. POWER button F. LED temperature display

C. Decrease temperature button G. Standby ON/OFF button

D. Increase temperature button H. Power LED

Special Features

LED Display – When the unit is plugged in, the LED display will show the

room temperature. At Auto mode, it will display the set value 2 minutes

after the desired temperature is set.

Overheat Cut-Off Protection System –This heater includes a protection

system that cuts off the unit if it overheats for any reason.

Inlet Air Overheat Protection System – This heater will automatically cut off

if the inlet air duct becomes obstructed and causes the unit to overheat.

Safety Tip-Over Switch – The Dr. Infrared Heater is designed to cut off

automatically when tipped in any direction. Place the heater on a flat,

smooth, stable surface to prevent the heater from tipping over again. When

returned to a normal upright position, the heater is ready for use again.

This is a safety feature to avoid the possibility of fire should the unit be

tipped accidentally.

Note: There may be a trace of smoke or odor when the unit is first operated.

Do not be alarmed. This indicates a drop of oil fell on the interior coils during

the manufacturing process. It will quickly evaporate and should not recur.