Use and Care Manual

 To turn off the heater, switch off the circuit breaker.

The circuit breaker serves as the power source for

the heater.

This heater includes a visual alarm to warn that parts of the

heater are getting excessively hot. If the alarm flashes,

immediately turn the heater OFF and inspect for any objects on or

adjacent to the heater that may cause high temperatures. DO

NOT OPERATE THE HEATER WITH THE ALARM FLASHING.

To reset the heater, switch the circuit breaker OFF. Wait five to

ten minutes for the heater to cool down before turning the heater

on again.

No user maintenance on this heater should be undertaken except

regular cleaning as described below. All other servicing or

maintenance should be performed by qualified service personnel.

Before any cleaning, make sure that:

1. Power supply is disconnected at the source. Switch off the

circuit breaker.

2. Wait 60 minutes to ensure the heating element has cooled down.

Your heater is now ready for cleaning.

Regular Cleaning:

1. Do not spray chemicals or other cleaning liquids on the heater.

2. Interior dust can often be removed by using a vacuum cleaner

with a crevice tool attachment.

3. To clean enclosure, use a clean, soft, and lightly damp cloth to

gently wipe off the dirt from the surface of the unit. Make sure the

heating element and the switches do not get wet. Allow the unit to

dry completely before use.

CAUTION: DO NOT ALLOW WATER TO RUN INTO THE

INTERIOR OF THE HEATER AS THIS COULD CREATE A FIRE

OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.

MAINTENANCE AND CLEANING

INSTRUCTIONS(separate page)