Warranty

8
after making the connections, arrange the pigtail leads of unit and
power supply wires in the wiring compartment.
12. You can use the inside or wall thermostat. If you use the inside
thermostat, press the rocker switch to INSIDE THERMOSTAT.
13. How to install Wall Thermostat. (DR-001 Not Included.)
A. Install Thermostat Outlet Box to the wall. Open the knock-out
on the right. Run line voltage wires to the thermostat location
via the knock-out.
B. Press the rocker switch to WALL THERMOSTAT, insert two
16AWG wires (not included) to Terminal A inside the heater,
make sure to tighten the screws in Terminal A.
TERMINAL A
16AWG WIRES
Red
Black