Warranty

7
7. Hook the unit to the wall mount bracket and let the unit hang from
the bracket.
8. Insert the screw through the mounting bracket and the heater
handle. Tighten the nut.
9.Loosen the screw to remove the wiring compartment/connection
cover in the rear of the heater. There are three pigtail leads. Both
Black (L1) and Red one (L2) are for power connection; Green is for
grounding connection.
10. Run the electrical power supply cable in flexible conduit and
connect to the wiring compartment via the knock-out at back side
of the unit. The rectangle hole is watch window for wiring.
11. Make the connections properly with connectors which are
suitable for the conductor size, including grounding wiring. And