Warranty

6
·Screw Kit
Screw Kit Contents
Qty
Description
2
M10 Explosion Screw
1
M10x60mm Screw
1
M10 Nut
2
Ф10 Washer
1
Ф10 Spring Washer
2
Ф10 Rubber Pad
WARNING: To reduce the risk of fire, do not store or use gasoline
or other flammable vapors and liquids in the vicinity of the heater.
INSTALLATION INSTRUCTIONS:
1. This heater should be installed at least 6 feet (1.8 m) from the floor
and no closer than 1 foot (0.3 m) from any adjacent surfaces or walls.
This minimum distance must be maintained.
2. Keep at least 4.5 inches (0.12m) from the back wall, regardless of
whether the wall mount bracket is used.
3. Mark the drill-hole positions in the wall or ceiling for the mounting
bracket.
4. Drill the required holes with diameter fitted to the anchor provided
for positioning the wall mount bracket.
5. Insert the anchors.
6. Attach the wall mount bracket to the wall or ceiling and secure with
mounting screws.
WALL MOUNT
CEILING MOUNT