Warranty

16
 SETTING HIGH/LOW HEATING MODE
When the heater is running, press the MODE button to set the
heater to run on HIGH or LOW heating.
HIGH heating: 7500W
LOW heating: 4700W
Note: You can not set the HIGH/LOW mode when the room
temperature is equal to or greater than the set temperature+2℉,
because the heater is OFF.
 SETTING THE TIMER (with the remote control)
Press the TIMER button until Set Time starts flashing. The
default value is 3 hours.
Press the “+” button to increase the set time or the “–” button to
decrease the set time. The timer can be set from 1 to 12 hours.
The timer will set and execute after the LED display stops
flashing. The heater will shut OFF automatically when the set
time is reached.
To turn the timer OFF, press the TIMER button, and then
pressing the “–” button to set the time to 0. The timer feature will
turn off when the LED stops flashing.
.
 To turn off the heater, switch off the circuit breaker.
The circuit breaker serves as the power source for
the heater.
This heater includes a visual alarm to warn that parts of the
heater are getting excessively hot. If the alarm flashes,
immediately turn the heater OFF and inspect for any objects on or
adjacent to the heater that may cause high temperatures. DO
NOT OPERATE THE HEATER WITH THE ALARM FLASHING.
To reset the heater, switch the circuit breaker OFF. Wait five to
ten minutes for the heater to cool down before turning the heater
on again.