How to Guide

Remote Controller
HOW TO INSERT BATTERIES
NOTE: Remove the batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.
DO NOT MIX OLD AND NEW BATTERIES!
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR
RECHARGEABLE (NICKEL-CADMIUM) BATTERIES!
Instructions for Use of IR Remote Control
:
The buttons of the remote control will function in the same manner as those on
the control panel on the front of the heater. Set the timer by using the remote
control.
Setting the Timer
1. Press the TIMER button until the Set Time starts flashing. The default value is
3 hours.
2. Press the “+” button to increase the set time or the “–” button to decrease the
set time.
The timer can be set from
1 to 12 hours. The timer will set and execute after the LED display stops
flashing. The heater will shut OFF automatically when the set time is
reached.
3. To turn the timer OFF, follow step 1, pressing the “–” button to set the time to 0.
The timer feature will turn OFF when the LED stops flashing.