Instructions / Assembly

5 | P a g e
4. Using a screwdriver mount the assembled L-shaped bracket (H1) to the anchors using screws
(H3) as shown in Fig - 4a.
5. Take off the 4 screws on the back of the heater. And use the 4 screws to fasten the heater on
the L-shaped bracket by screwdriver as shown in Fig - 5a.
6. Assembly the 4 L-shaped brackets (H1) with 2 nuts (H4) and 2 screws (H5) as shown in Fig - 6a.
H3 H3
H3 H3
Fig - 4a
Take off 4 screws on the back of
the heater
Secure the 2 L-shaped
bracket (H1) with 4 screws
Fig - 5a
Fig - 6a
H5
H5
H4 x2