Instructions / Assembly

3 | P a g e
This heater is for use at 240 volts. The cord has a plug as shown in D in Figure 60.1. No adapter is
available for this blade configuration, and none should be used. The type outlet is a 240 volt
grounding outlet. When properly installed, it provides a ground connection through the cord to
the heater to protect the operator from electric shock.
Mount Instruction
Required hardware contents
No.
Desc.
Qty
No.
Desc.
Qty
H1
L shaped bracket
4
H4
Nut
2
H2
Plastic anchor
4
H5
Screw
2
H3
Screw
4
H1 H2 H3 H4 H5
H1 H2 H3 H4 H5