Instructions / Assembly

2 | P a g e
19. If the supply cord is damaged in any way, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
20. Parts of the heater may exceed 200℃, Contact with the heating tube, reflector, or metal parts
near the heating tube, may cause severe BURNS. To avoid burns, do not let bare skin touch hot
surface.
21. ALWAYS allow the heating element to cool at least 10 minutes before touching the heating
tube or adjacent part
22. This product contains recyclable materials. Do not dispose of this product as unsorted
municipal waste. Please contact your local municipality for the nearest collection point.
23. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep
combustible materials, such as furniture, pillows, bedding, papers, clothes, etc. and curtains at
least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear
24. Extreme caution is necessary when any heater is used by or near children or invalids and
whenever the heater is left operating and unattended.
25. Do not operate any heater after it malfunctions. Disconnect power at service panel and have
heater inspected by a reputable electrician before reusing.
26. To disconnect the heater, turn controls off, and turn off power to the heater circuit at the main
disconnect panel (or operate an internal disconnect switch if provided).
27. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the heater.
28. To prevent a possible fire, do not block air intakes or exhaust in any manner.
29. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline,
paint, or flammable vapors or liquids are used or stored.
30. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
SAVE THESE INSTRUCTIONS
Introduction
The DR-239 carbon infrared heater produces instant and comfortable heat like the sun. This robust
and weather-proof heater is designed for domestic and commercial heating applications within
indoor and outdoor areas.
Model
DR-239
Voltage(V)
240V AC
Wattage(W)
3000W
Hertz (Hz)
60
Dimensions W×H×D(in.)
41.2 x 5.90 x 3.37
Weight (lb)
7.6
Minimum 16 amps circuit outlet required