Instructions / Assembly

9 | P a g e
FUNCTION & OPERATION
A) The heater must be properly installed before it is used.
B) The heater can be used at well-protected outdoor area with a height 2.4 meters fixed mounted
installed, user-operated devices intended to reduce the risk of fire, electric shock, or injury to
persons; must follow instructions. Do not change the heater structure, it may cause a fire risk.
C) Storage: PLUG-OFF, Store the heater in a cool, dry location when not in use to prevent dust and
dirt build up. Use packaging carton to store
D) Unplug the power cord for your safety before cleaning your appliance.
1. Make sure the heater is cool before continuing
2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a
mild detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let
liquids enter the heater)
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
4. DO NOT immerse the heater in the water
5. Wait until the heater is completely dry before use.
Inserting Batteries (not included)
Insert 2 AAA/ Alkaline type of batteries into your remote control.
Flip the backside of your remote control and pull out the battery cover. Insert the batteries in
accordance with the instructions and polarity of the batteries.
Change the batteries in the same way depicted above.
NOTICE:
1. Replace the old batteries with the same type batteries. Otherwise, your heater may not
function well.
2. Pull out the batteries if the heater is not in use for an extended period of time to prevent
leakage which may impair your remote control.
3. Do not allow water or liquid to get into the remote control.