Specs

POWER-FAB
®
Top-of-Pole PV Mounting System
Key Benets
n
Maximum Strength
n
Module Specic Design
n
Ease of Assembly – Reduced Parts
n
Single Ground Penetration
n
Seasonal Elevation Adjustment
Maximum Strength – Durable Design
n
Standard mounts designed to withstand
90 MPH wind zones
n
MIG welded steel strong backs
and mounting sleeves
n
Two coats of industrial urethane enamel paint
n
6000 series structural Aluminum
mounting rails
n
Stainless Steel module mounting hardware
n
Zinc plated rack assembly hardware
The POWER-FAB TPM is designed to install
quickly and provide a secure mounting structure
for PV modules on a single pole. The module
specic design reduces the number of com-
ponents and provides for an easier assembly.
The TPM utilizes high strength welded steel
components and corrosion resistant hardware
for long term reliability. Seasonal adjustability
for maximizing production is provided by six
different tilt-angle settings and is a single person
operation.
Ease of Assembly – Reduced Labor
Costs
n
Module Specic design reduces number
of parts
n
No measuring required
n
Array tilts at for easy module placement
n
Factory set module hole placement locations
create uniform spacing
n
Easy access bottom ange bolting
4000-B Vassar Drive NE
Albuquerque, New Mexico 87107
USA
Telephone: [phone]
Fax: [phone]
Web Site: www.DPWSolar.com
E-mail: [e-mail]
© 2013 Preformed Line Products
Printed in U.S.A.
SL-SS-1079-4
06.13.1M
Application Flexibility
n
Several sizes available from 1 through
24 modules
n
Installs over standard Schedule 40 or 80 rigid
steel pipe (Installer Supplied)
n
15° to 65° tilt angle settings (10° increments)
n
Mount up to 4.1kW on a single pole
Options / Upgrades
n
High Wind Version – 130 MPH Exposure C
n
Hot Dip Galvanized or Powder Coated
Finish on steel components
n
Anodized Module rails
n
Stainless Steel Rack Assembly
Hardware Package
n
Tamper-Resistant Module Mounting
Hardware Package
Foundation Design Support available
from DPW Solar’s staff of engineers.
Ordering Guideline
TPM8-D-SHARP-NE170UC1-HWV-AA
Number of Modules
Module Manufacturer
Module
Manufacturer’s
Part Number*
DPW Module Series
Upgrade
Options
*Important: Include complete module part # as listed on
module manufacturer’s specication sheet