User manual

60
DPMS XPQ User Manual
A chart in the software is shown below:
Fig 4.3 Voltage Spectrum
Phase angle
Phase angle indicates the angle between U1 and other voltage and current
parameters. It ranges from 0 - 360 degrees. This function is to help you nd out
the relationship between all input signals avoiding incorrect wiring. When it is
set to “2LL”, it gives the phase angle of u23, i1, i2, i3 corresponding to u12 and
u2, u3, i1, i2, i3 corresponding to u1 for other settings.
The following gure is an example: