User manual

53
POWER INSTRUMENTS
07: This screen will display only when you select the “at
once”.
08: Set your time of freezing on this screen when you
select the “assign” mode.
09: There are two modes of clearance: “assign” means
clear at an assigned time, this will skip the 10th screen
to the 11th to set the time. “At once” means clear at once
after you nish the 10th screen.
10: Finish this screen when you select the “at once”
mode.
11: Execute this order every year at this date:MM:DD.
12: Execute this order every year at this time:hh:mm:ss.
13: “0”stands for fundamental based measuring, “1”
stands for all-wave based measuring.
14: “0” stands for mode 0:
“1” stands for mode 1: .
09 : TOU cl earance
mode selection
10: TOU cl earing at
once setti ng
11 : TOU cl earance date
setting
07 : Freezi ng at once
setting
08 : Fr eezing time
setting
V/A
V/A
V/A
V/A
V/A
12 : TOU cl earance time
setting
V/A
13 : Ener gy measuring
mode selection
14 : Apparent power
measuring mode
V/A