User manual

44
DPMS XPQ User Manual
Statistics Display
Press the P and V/A keys simultaneously, the Max and Min value of
metering data will be displayed on the screen. The time stamp can be accessed
through the communication port. P is used to change the display between
MAX and MIN, V/A is used to scroll the screen. The screen will scroll to the
next display as you press V/A each time. It will go back to the rst screen if you
press V/A at the last screen. It will exit whenever you press P and V/A Keys
simultaneously.
The following shows you how it scrolls:
Note: Set to "2LL", there is no display of "Max value of phase voltage"
.
Max value of the line to
li ne voltage
Max value of current
Max value of power
Max value of phase
voltage
V/A
V/A
V/A
V/A
Max value of voltage
harmonics
Max value of unbalance
factor
Max value of current
demand
Max value of current
harmonics
V/A
V/A
V/A
V/A
P
+
V/A