User manual

106
DPMS XPQ User Manual
1087H~108BH Start time of rst schedule:
mm:dd:hh:mm:ss
Time F3
108CH~1090H End time of rst schedule:
mm:dd:hh:mm:ss
Time F3
1091H First interval enable or not 1:enable; 0:disable F1
1092H~1094H Start time of rst interval: hh:mm:ss 0~23 F3
1095H~1097H End time of rst interval: hh:mm:ss 0~23 F3
1098H Fee type of rst interval 0:sharp,1:peak,
2:valley,3:normal
F1
1099H~10A0H The second interval Same as the rst interval
10A1H~10A0H The third interval Same as the rst interval
10A9H~10A8H The fourth interval Same as the rst interval
10B1H~10B0H The fth interval Same as the rst interval
10B9H~10B8H The sixth interval Same as the rst interval
10C1H~10C0H The seventh interval Same as the rst interval
10C9H~10C8H The eighth interval Same as the rst interval
10D1H~10D0H The second schedule Same as the rst schedule
111CH~1166H The third schedule Same as the rst schedule
1167H~11B1H The fourth schedule Same as the rst schedule
Real Time Energy Measurement
Data stored in this block can be reset or cleared.
Function code: 03H for Reading, 10H for writing, data type: dword.
Address Parameter Range Format
code
11B2H(high)
11B3H(low)
Consumption energy 0~99999999.9 F4